MODULE 11 ( CCNA 1) 1. Users in the network are
experiencing slow response time when doing file transfers to a remote
server. What command could be issued to determine if the router has
experienced any input or output errors? 3.
Refer to the exhibit. A network administrator on HostA has problems
accessing the FTP server. Layer three connectivity testing was
successful from HostA to the S1 interface of RouterB. Which set of
commands will allow the network administrator to telnet to RouterB and
run debug commands? • RouterB(config)# enable secret class RouterB(config)# line vty 0 4 RouterB(config-if)# login • RouterB(config)# enable secret class RouterB(config)# line vty 0 2 RouterB(config-vty)# password cisco RouterB(config-vty)# login • RouterB(config)# enable secret class RouterB(config)# line vty 0 RouterB(config-line)# password cisco RouterB(config-line)# login • RouterB(config)# enable secret class RouterB(config)# line aux 0 RouterB(config-line)# password cisco RouterB(config-line)# login • RouterB(config)# enable secret class RouterB(config)# line aux 0 RouterB(config-vty)# password cisco RouterB(config-vty)# login 4.
Refer to the exhibit. The output is shown for the show ip route command
executed on Router A. What does the IP address 192.168.2.2 represent? • Gateway for the 192.168.1.0 network • Gateway for the 192.168.3.0 network • IP assigned to the serial port on Router A • IP assigned to the serial port on Router B 5. What command is used to change the default router name to Fontana? • Router# name Fontana • Router# hostname Fontana • Router(config)# name Fontana • Router(config)# hostname Fontana 6. The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.) • Sydney(config-if)# ip address 201.100.53.2 255.255.255.0 • Sydney(config-if)# no shutdown • Sydney(config-if)# ip address 201.100.53.1 255.255.255.224 • Sydney(config-if)# clock rate 56000 • Sydney(config-if)# ip host Melbourne 201.100.53.2 7. Refer to the exhibit. What additional command is required to allow remote access to this switch? • NA-SW1(config-if)# no shutdown • NA-SW1(config)# enable password password • NA-SW1(config)# ip default-gateway address • NA-SW1(config-if)# description description 8. When network services fail, which port is most often used to access a router for management purposes? AUX Ethernet • Console Telnet SSH 9. A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a router to manage it. Which access method should be chosen? • Telnet • Console • AUX • SSH welcome to 10. In a Cisco router, when do changes made to the running-configuration take effect? • after a system restart • as the commands are entered • when logging off the system • when the configuration is saved to the startup-configuration 11. Refer to the exhibit. Which names correctly identify the CLI mode represented by the prompt for Switch-East4#? (Choose two.) • line configuration mode • user executive mode • global configuration mode • privileged executive mode • interface configuration mode • enable mode 12. Which three terms correctly define the forms of help available within the Cisco IOS? (Choose three.) • hot keys • context-check • context-sensitive • structured check • command override • command syntax check 13. Which combination of keys would be used at the CLI prompt to interrupt a ping or traceroute process? • Ctrl-C • Ctrl-P • Ctrl-R • Ctrl-Shift-6 • Ctrl-Z 14.
Refer to the exhibit. What command will place the router into the
correct mode to configure an appropriate interface to connect to a LAN? 15. On a Cisco router, which interface would be used to make the initial configuration? 16.
Refer to the exhibit. A student is responsible for the IP addressing,
configuration and connectivity testing of the network shown in the
graphic. A ping from host B to host C results in a destination
unreachable but a ping from host B to host A was successful. What two
reasons could account for this failure based on the graphic and partial
router output for the Dallas router? (Choose two.) |
